Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
and Package
Features
Description
Absolute Maximum Ratings
Recommended
Operating Conditions
Electrical Characteristics
Reliability and Approvals
Similar
Optocouplers
Home Page
High Density Hermetically Sealed 24 Pin Vertical-in-Line Package
Low
Input Current Requirement (0.5 mA)
High Current Transfer Ratio
TTL
Compatible Output
Low Power Consumption
Performance Guaranteed over -55°C
to +125°C Ambient Temperature Range
Withstand Test Voltage 1500 Vdc
This device consists of eight light emitting diodes, optically coupled to corresponding integrated high gain photon detectors configured as two independent groups of four channels. The high gain output stages feature open collector outputs providing both lower output saturation voltage and higher speed of operation than possible with conventional photodarlington type coupler. The minimum CTR of 1000% at an input current of 0.5 mA makes it ideal for use in low input current applications such as MOS, CMOS and low power logic interfacing or data transmission systems. Surface Mount Option Available.
Absolute Maximum Ratings | |
| Storage Temperature: Operating Temperature: Lead soldering: |
-65°C to +150°C -55°C to +125°C 260°C for 10s, 1.6mm below seating plane |
Input Diode | |
| Peak Forward Current: Reverse Voltage: |
8mA 5V |
Output Detector | |
| Supply Voltage Vcc: Current Io: Voltage Vo: Collector Power Dissipation: |
-0.5V to 20V 40mA -0.5V to 20V 50mW |
| SYMBOL | PARAMETER | MIN | MAX | UNIT |
| VFL | Input Voltage Low Level | - | 0.7 | V |
| IFH | Input Current High Level | 0.5 | 2.0 | mA |
| VCC | Supply Voltage Output | 2.0 | 5.5 | V |
(Ta=-55° to +125°C u.o.s.) *All typical values Vcc=5V, Ta=25°C
| PARAMETER | SYMBOL | TEST CONDITIONS | MIN | TYP* | MAX | UNIT |
| High Level Output Current | IOH | VF=0.7V, VO=VCC=5.5V | 0.001 | 250 | µA | |
| Optical Crostalk | IOHX | VF1=0.7V, IF2-8=1.0mA, VO=VCC=5.5V | µA | |||
| Low Level Output Voltage | VOL | VCC=4.5V, IO=5mA, IF=0.5mA | 0.1 | 0.6 | V | |
| VCC=4.5V, IO=5mA, IF=1.0mA | ||||||
| High Level Supply Current | ICCH | VCCA=VCCB=5.5V, VF1-8=0.7V | 0.08 | 80 | µA | |
| Low Level Supply Current | ICCL | VCCA=VCCB=5.5V, IF1-8=1.0mA | 6.0 | 12.0 | mA | |
| I/O Insulation Leakage Current | IIO | RH=45%, TA=25°C, t=5s, V=1500Vdc | 1.0 | µA | ||
| A to B Insulation Leakage Current | IA/B | µA | ||||
| Input Forward Voltage | VF | IF=1.0mA | 1.0 | 1.45 |
1.7 | V |
| Input Reverse Breakdown Voltage | VBR | IR=10µA | 5.0 | V | ||
| Propagation Delay to Logic High Output | tPLH | RL=1.0kohm, IF=1.0mA, VCC=5V, TA=25°C | 10 | µs | ||
| Propagation Delay to Logic Low Output | tPHL | |||||
| Current Transfer Ratio | CTR | VO=0.6V, VCC=4.5V, IF=0.5mA | 1000 | 2000 | % | |
| VO=0.6V, VCC=4.5V, IF=1.0mA | 500 | 1500 | % |
As manufacturer of high reliability optocouplers Isocom Ltd's manufacturing
plant at North Shields, England, has site approval to BS9000 (registered number
1294/M) and CECC20000 (registered number M/1084/CECC/UK) issued by the British
Standards Institution.
Together with CECC, BS9000 is a preferred standard for use in European
military projects. Consequently, Isocom Ltd's approved devices are listed in the
CECC "MUAHAG" preferred products list.
The BS9000 approval is also recognised as meeting the equivalent criteria
to those required by BS5750/IS09000/EN29000.
The Company's customers can be assured of our commitment to stringent
quality, reliability and inspection standards, as demonstrated by our existing
approvals. Other customer specific options can also be offered.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.