.gif)
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Similar Optocouplers
Home Page
IS149 |
IS703A |
IS708A |
|---|---|---|
 |
 |
 |
Phototransistor Output.
High Sensitivity.
Low Cost Plastic Housing.
Lensed For Dust Protection And Ambient Light Filtration.
The IS149, IS703A and IS708A each consist of a Gallium Arsenide infrared
emitting diode and an NPN silicon phototransistor mounted side-by-side on
converging optical axes, in a black plastic housing. A filtering lens in the
face of the housing seals the device from dust and dirt and reduces ambiant
light noise. The photosensor responds to radiation from the LED only when a
reflective object passes within its field of view.
All electrical parameters are 100% tested by manufacturing. Specifications
are guaranteed to a cumulative 0.65% AQL.
Absolute Maximum Ratings (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: |
-40°C to +80°C -40°C to +80°C 240°C for 5s, 1.6mm from case (note 2) |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Power Dissipation: |
40mA (note 3) 3V 70mW (note 4) |
Output Phototransistor | |
| Collector-Emitter Voltage: Emitter-Collector Voltage: Power Dissipation: |
30V 5V 50mW (note 3) |
| INPUT DIODE | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VF | Forward Current | IF=40mA | 1.7 | V | ||
| IR | Reverse Current | VR=3V | 100 | µA | ||
| OUTPUT PHOTOTRANSISTOR | ||||||
| V(BR) CEO | Collector-Emitter Breakdown Voltage | IC=100µA | 30 | V | ||
| V(BR) ECO | Emitter-Collector Breakdown Voltage | IE=100µA | 5 | V | ||
| ICEO | Collector Dark Current | VCE=10V, IF=0, EE=0.1µ W/cm sq | 100 | nA | ||
| COMBINED | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| IC (ON) | On-State Collector Current | IF=40mA, VCE=5V, d=0.20in, (5.08mm; notes 4,5) | 200 | µA | ||
| IF=40mA, VCE=5V, d=0.20in, (5.08mm; notes 4,6) | 35 | µA | ||||
1. RMA flux is recommended. Duration can be extended to 10s max. when flow
soldering.
2. Derate linearly 1.27mW/°C above 25°C
3.Derate linearly
0.91mW/°C above 25°C
4. d is the distancefrom the assembly face to the reflective surface.
5. Measured using an Eastman Kodak neutral white test card having 90%
diffuse reflectance as a feflecting surface
6. Measured using 3M Tape #476 for a reflecting surface. 3M Tape #467 has a
very black dull surface with optical reflective qualities comparable to a
surface coated with carbon black printers ink.
7. Lower curve is based on a calculated worst case condition rather than
the conventional - 2 O limit.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.