.gif)
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Similar Optocouplers
Home Page
11000 V Isolation Peak
15 mm (min) Internal Separation
4 Pin Dual-In-Line Package
Designed for VDE and British Standards
The IS31000 Series each consist of a Gallium Arsenide infrared emitting
diode and a silicon phototransistor housed in a plastic package.
All electrical parameters are 100% tested. Specifications are guaranteed to
a cumulative 0.65% AQL.
Absolute Maximum Ratings (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-55°C to +85°C -55°C to +85°C 260°C for 5s, 1.6mm from case 11000Vpeak |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 4V 3A (1µ p.w. 300pps) 100mW 1.67mW/°C above 25°C |
Output Transistor | |
| Collector-emitter voltage BVCEO: Emitter-collector voltage BVECO: Collector Current IC: Power Dissipation: Derate Linearly: |
30V 7V 100mA 150mW 2.50mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| CI | Capacitance | f=1MHz, VO=0 | 30 | pF | ||
| VF | Forward voltage | IF=60mA | 1.7 | V | ||
| IR | Reverse current | VR=3.0V | 1 | µA | ||
| VR | Reverse Breakdown Voltage | IR=10µA | 4 | V | ||
| BVCEO | Collector-emitter Voltage | IC=1mA, IF=0 | 30 | V | ||
| OUTPUT | ||||||
| BVECO | Emitter-collector Voltage | IE=100µA, IF=0 | 6 | V | ||
| IECO | Collector-emitter Dark Current | VCE=10V, IB=0 | 5 | 100 | nA | |
| CCE | Collector-emitter Capacitance | VCE=5V, f=1MHz | 3.3 | pF | ||
| IC/IF | DC Current Transfer Ratio | |||||
| IS31000 | IF=10mA, VCE=10V | 50 | % | |||
| IS30500 | 20 | % | ||||
| IS30200 | 10 | % | ||||
| COUPLED | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| RIO | Input-to-output Isolation Resistance | VIO=500V, (note 1) | 100 | Gohm | ||
| VCE(SAT) | Collector-emitter Saturation Voltage | IF=10mA, IC=0.5mA | 0.4 | V | ||
| CIO | Capacitance Input to Output | f=1MHz (note1) | 0.5 | pF | ||
| TON | Output Turn-on Time | VCC=10V, IC=2mA | 9 | µs | ||
| TOFF | Output Turn-off Time | RL=100ohm | 4 | µs | ||
| TON | Output Turn-on Time | IF=10mA, VCC=5.0V | 6.5 | µs | ||
| TOFF | Output Turn-off Time | RL=10kohm | 165 | µs | ||
| Input-to-output Isolation Voltage | (note 1) | 11000 | Vpeak | |||
1. Measured with input leads shorted together and output leads shorted
together.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.