.gif)
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Similar Optocouplers
Home Page
Rated Impulse Voltage (Transient Overvoltage)
Insulation
Test Voltage (Partial Discharge Test Voltage) VPD=1.6 kV
Creeping
Current Resistance according to VDE 0303/IEC 112
Rated
Insulation Voltage (RMS includes DC) VIOWM=600 VRMS (848
Vpeak)
Rated Recurring Peak Voltage (Repetitive) VIORM=600 VRMS
Comparative Tracking Index CTI=275
The IS3051 and IS3052 are constructed from a Gallium Arsenide Infrared
Emitting Diode and Silicon Triac Bidirectional (double Thytistor) Detector,
housed in a plastic package. Surface Mount Option Available.
All electrical parameters are 100% tested by manufacturing. Specifications
are guaranteed to a cumulative 0.65% AQL.
Absolute Maximum RatingsEmitter | |
| Reverse Voltage: Forward Current: Forward Surge Current: Power Dissipation: Derate Linearly: Junction Temperature: |
6V 60mA 3A 100mW 1.33mW/°C above 25°C 125°C |
Detector | |
| Off-State Output Terminal Voltage: On-State RMS Current: Peak Surge Current: Collector Peak On-State Current: Power Dissipation: Junction Temperature: |
600V 100mA 1.2A 2A 300mW 125°C |
Coupled Device (Max) | |
| Total Power Dissipation: Storage Temperature Range: Ambient Temperature Range: Soldering Temperature: |
330mW -55°C to +125°C -40°C to +100°C 260°C |
| EMITTER | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| VF | Forward Voltage | IF=50mA | 1.25 | 1.6 | V | |
| VBR | Breakdown Voltage | IR=10µA | 5 | V | ||
| CJ | Junction Capacitance | VR=0, f=1MHz | 50 | pF | ||
| DETECTOR | ||||||
| VDRM | Off-State Output Terminal Voltage | IDRM=100nA | 600 | V | ||
| VTM | Peak On-State Voltage | ITM=100mA, IFT=30mA | 1.5 | 3 | V | |
| dV/dt cr2 | Critical Rate of Rise of Off-State-Voltage | IF=0, VS=240Vrms | 50 | V/µs | ||
| dV/dt crq2 | IF=30mA, VS=60Vrms | 0.13 | 0.25 | V/µs | ||
| COUPLED | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| IFT | Emitter Diode IS3051 | VT=6V, RL=150ohm | 10 | 15 | mA | |
| Trigger Current IS3052 | 5 | 10 | mA | |||
| IH | Holding Current | IF>=10mA, VS>=3V | 1 | mA | ||
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.