.gif)
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit and Package
Features
Description
Absolute Maximum
Ratings
Electrical Characteristics
Reliability and Approvals
Similar Optocouplers
Home
Page
Hermetically Sealed 6 Pin Ceramic Dual-in-Line Package
Operating
Temperature Range -55°C to +125°C
Manufactured in BS9000/CECC
Approved Factory
Pin for Pin Compatible with Standard Plastic 6 Pin Products
High
Collector-Emitter Breakdown Voltage: 150 V Min
The CS202 is an optically coupled isolator consisting of an infra-red emitting diode and a Silicon phototransistor packaged in a hermetically sealed 6 pin, ceramic package offering high collector-emitter breakdown voltage with full military operating temperature guaranteed. Selections to higher BVceo or CTR available upon request. Surface Mount Option Available.
Military, high reliability systems, switching supply feedback element, medical instrumentation, system test equipment, signal transmission between circuit of different potential and impedance.
Absolute Maximum Ratings | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-65°C to +150°C -55°C to +125°C 260°C for 10s, 1.6mm below seating plane ±1500Vdc |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
50mA 3V 1.5A (duration<=1ms) 150mW 1.6mW/°C above 100°C |
Output Transistor | |
| Collector-Emitter Voltage BVceo: Collector-Base Voltage BVcbo: Emitter-Collector Voltage BVeco: Collector Current: Collector Current: Power Dissipation: Derate Linearly: |
150V 150V 7V 50mA 100mA (t=1ms) 150mW 1.4mW/°C above 100°C |
(Ta=25°C u.o.s.)
| SYMBOL | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VF | Forward Voltage | IF=10mA | 0.7 | 1.18 | 1.5 | V |
| IF=10mA, TA=125°C | 1.10 | V | ||||
| IF=10mA, TA=-55°C | 1.29 | V | ||||
| IR | Reverse Current | VR=3.0V | 10 | µA | ||
| BVCEO | Collector-Emitter Breakdown Voltage | IC=1mA | 150 | V | ||
| BVCBO | Collector-Base Breakdown Voltage | IB=0.1mA | V | |||
| BVECO | Emitter-Collector Breakdown Voltage | IE=0.1mA | 7 | V | ||
| BVEBO | Emitter-Base Breakdown Voltage | IB=0.1mA | 5 | V | ||
| ICEO | Collector-Emitter Leakage Current | VCE=100V, IF=0 | 1 | µA | ||
| VCE=100V, IF=0, TA=125°C | 200 | µA | ||||
| IC/IF | DC Current Transfer Ratio | IF=10mA, VCE=5V | 30 | % | ||
| IF=10mA, VCE=5V, TA=125°C | 15 | % | ||||
| IF=10mA, VCE=5V, TA=-55°C | 30 | % | ||||
| VIO | Isolation Voltage | 1500 | Vdc | |||
| tON | Turn On Time | RL=1kohm, VCC=10V, IF=10mA | 6 | µs | ||
| tOFF | Turn Off Time | 25 | µs |
Isocom Ltd supplies high reliability devices for applications requiring an
operating temperature range of -55°C to +125°C (e.g. military
applications).
Devices supplied have completed rigorous testing, and various high
reliability test options are offered. The Company is developing a suitable
specification to permit release to CECC 20000.
As a manufacturer of high reliability optocouplers Isocom Ltd's
manufacturing plant in North East England, has site approval to BS9000
(registered number 1294/M) issued by the British Standards Institution. Together
with CECC, BS9000 is a preferred standard for use in European military projects.
Consequently, Isocom Ltd's approved devices are listed in the CECC "MUAHAG"
preferred products list.
The BS9000 approval is also recognised as meeting the equivalent criteria
to those required by BS5750/ISO9000/EN29000.
The Company's customers can be assured of our commitment to stringent
quality, reliability and inspection standards, as demonstrated by our existing
approvals. Other customer-specific options can also be offered.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.