.gif)
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit and Package
Features
Description
Absolute Maximum
Ratings
Recommended Operating Conditions
Truth Table
Electrical
Characteristics
Reliability and Approvals
Similar Optocouplers
Home
Page
 |
1. Anode Channel 1 Input 2. Cathode Channel 1 Input 3. Cathode Channel 2 Input 4. Anode Channel 2 Input |
5. Ground 6. Channel 2 Output Vo2 7. Channel 1 Output Vo1 8. Supply Voltage Vcc |
Hermetically Sealed 8-Pin Ceramic Dual-in-Line Package
High Speed:
Typically 5 Mbits/s (250 ns max)
TTL Compatable Input and Output
High Common Mode Rejection
Performance Guaranteed Over -55°C to +125°C Ambient Temperature
Range
1500 Vdc Withstand Test Voltage
Low Input Current
The CD670 is a dual channel device hermetically sealed in a 8-pin ceramic package. It incorporates high power LED emitters and high gain integrated photodetectors. The outputs are open collector Schottky clamped transistors. Surface Mount Option Available.
Military, high reliability system, telephone ring detection, microprocessor system interface, level shifting, digital logic ground isolation, current loop receiver, isolation input line receiver, system test equipment isolation, process control input/output isolation
Absolute Maximum Ratings | |
| Storage Temperature: Operating Temperature: Lead Soldering: |
-65°C to +150°C -55°C to +125°C 260°C for 10s, 1.6mm from case |
Input Diode | |
| Peak Forward Current IF: Average Forward Current IF: Reverse Voltage VR: Power Dissipation: |
40mA (duration<=1ms) 20mA 5V 35mW |
Output Detector | |
| Supply Voltage VCC: Current IO: Voltage VO: Collector Power Dissipation: |
7V (1 minute max) 25mA 7V 40mW |
Total Package | |
| Power Dissipation: | 350mW |
| PARAMETER | SYMBOL | MIN | MAX | UNIT |
| Input Voltage, Low Level | VFL | 0 | 0.8 | V |
| Input Current, High Level | IFH | 1.0 (*) | 10 | mA |
| Supply Voltage, Output | VCC | 4.5 | 5.5 | V |
| Fan Out (TTL Load) | N | - | 6 |
* 1.0mA condition permits at least 20% CTR degradation guardband on initial switching threshold of 0.8mA or less.
| INPUT | OUTPUT |
| High | Low |
| Low | High |
(Ta= -55°C to +125°C u.o.s.; all typical values at Vcc=5V, Ta=25°C.)
| SYMBOL | PARAMETER | CONDITIONS | VALUE | |
| IOH | High Level Output Current | VCC=VO=5.5V, VF=0.8V | 250 µA | Max |
| VOL | Low Level Output Voltage | VCC=5.5V, IF=0.8mA, IOL=13mA | 0.6 V | Max |
| ICCH | High Level Supply Current | VCC=5.5V, IF=0 | 30 mA | Max |
| ICCL | Low Level Supply Current | VCC=5.5V, IF1,2=1mA | 38 mA | Max |
| IIO | Input-Output Insulation Leakage Current | RH=45%, TA=25°C, t=5s, VIO=1500Vdc | 1.0 µA | Max |
| VF | Input Forward Voltage | IF=2mA, TA=25°C | 1.6 V | Max |
| 1.5 V | Typ | |||
| IF=2mA | 1.9 V | Max | ||
| VBR | Input Reverse Breakdown Voltage | IR=10µA, TA=25°C | 5 V | Min |
| tPLH | Propagation Delay Time to Logic High Output | RL=350ohm, CL=15pF, IF=1.0mA | 250 ns | Max |
| tPHL | Propagation Delay Time to Logic Low Output | Max | ||
| CTR | Current Transfer Ratio | VO=0.6V, IF=0.8mA, VCC=5.5V | 2000 % | Min |
Isocom Ltd supplies high reliability devices for applications requiring an
operating temperature range of -55°C to +125°C (e.g. military
applications).
Devices supplied have completed rigorous testing, and various high
reliability test options are offered. The Company is developing a suitable
specification to permit release to CECC 20000.
As a manufacturer of high reliability optocouplers Isocom Ltd's
manufacturing plant in North East England, has site approval to BS9000
(registered number 1294/M) issued by the British Standards Institution. Together
with CECC, BS9000 is a preferred standard for use in European military projects.
Consequently, Isocom Ltd's approved devices are listed in the CECC "MUAHAG"
preferred products list.
The BS9000 approval is also recognised as meeting the equivalent criteria
to those required by BS5750/ISO9000/EN29000.
The Company's customers can be assured of our commitment to stringent
quality, reliability and inspection standards, as demonstrated by our existing
approvals. Other customer-specific options can also be offered.
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.